Anmol Chemicals is the pioneer manufacturers of Sodium Acetate, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Sodium Acetate made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium Acetate is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal Sodium Acetate Anhydrous Trihydrate BP USP ACS AR Analytical Reagent Food Grade Manufacturers
This is a summary computer translation of our web pages. Please visit our Home Page for Safety Data Sheet and Sodium Acetate Manufacturers write-up
CAS: 127-09-3 (Anhydrous), 6131-90-4 (Trihydrate), Chemical Formula: CH3COO-Na for Anhydrous, Molecular Weight: 82
SPECIFICATIONS OF SODIUM ACETATE TRI-HYDRATE CRYSTALS
SODIUM ACETATE TRIHYDRATE PURE Assay= 99% Sodium Acetate Trihydrate minimum Appearance= White Transparent Crystalline A 10% Solution is clear & colourless Test Solution= 7.5-9 Arsenic= Less than 1 ppm Calcium & Magnesium= Less than 50 ppm Heavy Metals= Less than 1 ppm Iron= Less than 5ppm Chlorides= Less than 0.03% Sulphates= Less than 0.02% Packing= As required
SPECIFICATIONS OF SODIUM ACETATE ANHYDROUS POWDER
SODIUM ACETATE ANHYDROUS PURE Purity= 99 % minimum purity as CH3COONa Appearance= Snow-White Powder Clarity of 10% Solution= A 10% Solution w/v is clear and colourless pH (10% in water)= pH between 7.5-9 Arsenic < 1ppm. Calcium and Magnesium= To pass the test 50 ppm Heavy Metals < 1ppm Iron < 5ppm Chloride < 100ppm Sulphate < 20ppm Packing= 25kg(55 lbs)-50kg bags or pellets or as required We offer Sodium Acetate IP BP USP Ph Eur and Extra Pure from a world class FDA approved, ISO-9001, ISO-22000-2005 Certified facility
Sodium Acetate USP Specifications
C2H3NaO2-3H2O 136.08
Assay: Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Identification: A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying: Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter: Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride: A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate: A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium: To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium: Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals: the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Sodium Acetate Trihydrate BP Specifications
C2H3NaO2-3H2O
Action and use: Used in solutions for dialysis; excipient.DEFINITION
Sodium ethanoate trihydrate.
Content: 99.0 per cent to 101.0 per cent (dried substance).CHARACTERS
Appearance: Colourless crystals.
Solubility: Very soluble in water, soluble in ethanol (96 per cent).IDENTIFICATION
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 7.5 to 9.0. Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances: Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 200 ppm.
Aluminium: Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium: Maximum 50 ppm, calculated as Ca.
Heavy metals: Maximum 10 ppm.
Iron: Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying: 39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.
Sodium Acetate FCC Food Grade, US Food Chemical Codex
C2H3NaO2 Formula wt, anhydrous 82.03
C2H3NaO2-3H2O Formula wt, trihydrate 136.08DESCRIPTION
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Function: Buffer.REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.
Sodium Acetate Anhydrous ACS Analytical Reagent specifications
CH3COONa
Formula Wt 82.03
CAS Number 127-09-3REQUIREMENTS
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25CMAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Acetate Trihydrate ACS Analytical Reagent specifications
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4REQUIREMENTS
Assay: 99.0-101% NaC2H3O2 . 3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes testMAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.
Sodium Acetate BP USP ACS AR Analytical Reagent FCC Food Grade manufacturers:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264e-mail: anmolc@mtnl.net.in